Antique effect powder coating for metal florid factory

FOB Reference Price:Get Latest Price
US $2.24-3.38 / Kilograms | 300 Kilogram/Kilograms (Min. Order)
Report Suspicious Activity
Quick Details
CAS No.:
Other Names:
electrostatic thermosetting powder coating
Place of Origin:
Jiangsu, China (Mainland)
Main Raw Material:
Epoxy/Polyester resin, aluminum powder
Appliance Paint, Boat Paint, Building Coating, Car Paint, Electrical Insulating Varnish, Furniture Paint
Application Method:
Powder Coating
Brand Name:
Florid Powder Coating
Model Number:
thermosetting spray Powder Coating
Antique effect powder coating for metal florid factory
Particle size Analysis:
Pencil Hardness:
No Bubble, Surface, without injury
No Bubble, Surface, without injury
spray thermosetting powder coating
6000 Ton/Tons per Year
Packaging & Delivery
Packaging Details
20KG/Carton, 17Tons/20''FCL, 26Tons/40''FCL;
spray powder coating packed in carton box, lined with double PE bags. Net weight 20kg per carton at temperature below 25 degree. A 20ft container could load 17tons . for Antique effect powder coating for metal florid factory
ShangHai Port, GuangZhou Port, Antique effect powder coating for metal florid factory
Lead Time :
3-5 days after the prepayment,Antique effect powder coating for

Antique effect powder coating for metal florid factory



TEl: 86-523-88686808; 




Cel: 86-13775795436;


Skpye: betty551860;




Product Description

 1. Our Powder Coating Advantage:

        (1)  Spray ratio is 90%;

        (2) 1KG of powder coating can spray 8-10 square meter;

        (3) Powder Coating adhesive force is stronger 8-10 years;

        (4) Powder Coating is not easy to fade in 5-8 years;



Good Chemical Resistance :


          (1) Excellent Levelling Property:




         (2) Bending Resistance






2. Charactcristic: Powder 



Available Powder TypesAvailable Colors
1. Epoxy powder coating1. RAL Colors
2. Polyester Powder Coating2.Pantone Colors
3.Epoxy-Polyester Powder Coating( Hybrid)3.Customer color matching
4.Polyurethane Powder CoatingAvailable finish
5.Heat transfer printing powder coating1. Smooth
Available gloss level2. Rough( Sand texture )
1. High gloss( Above 80%)3.Wrinkle( fine texture )
2. Flat gloss (50%-80%)4.Antique( hammer tone)
3. Semi gloss(5%-50%)5.Metallic
4. Matt ( below 5%)6.Other special effect ( artistic)








3. How to use it?






            Bad symtoms                  Possible Cause                 Solution

1.With low power, powder

coating is not easy to coated;


1. High voltage power supply shortage;1.Check the circuit                     
2.Grouding is bad;2.Remove clutter grouding line

3.Compressed air volume is too big,

   the powder to blow fell &blows away;

3.Spray appropriate isolation, 

   reduct air convection;

4.Powder particle size is too thin;

4.Add new powder coating, reduce the

   recovery powder consumption.

5.The air temperature is too high;

5.Powder particles with air water

   branch of low power, control

   temperature of spray area;

2. Charge repulsion powder 

    repboud from the working


1.The voltage is too high;1. Lower voltage and air volume;

2.Spray gun from the work location is 

   too close;

2. Extend the spray gun and artifacts;
3. Grouding is bad;3.Remove clutter grouding line;

4.Powder particle size is too thin, not

esay to attach to the workpiece surface;

4.Add new powder coating, reduce

   the recovery powder consumption;

3. Corner not easy spraying 

    penetration is bad;

1. The powder amount is too small;

1. Lower voltage and air volume, 

    increasing the amount of powder;

2. Grouding is bad;2. Adjust the spray gun position;
3. The voltage is too high;3. Choose small backboard, proper nozzle;
4. Spray gun position is not good;

4.If the corner is more and deeper, then 

   consider friction gun equipment;

5. Powder spraying range is too wide;
4.Powder  spraying uneven1. Air pressure is insufficient;1. Cleaning pipeline, spray gun and flowmeter;
2.Line fault block;

2.Check the air supply, Exclude water vapor 

   in powder agglomeration;

3.Block in the spray gun;

3.If powder agglomeration, to screen or 

   change new powder coating;




4.  Effect of Sample






 Our Powder Coating Advantage:


 1.1KG of powder coating can spray 8-10 square meter;  2.Spray ratio is 95 %;  3.Powder coating adhesive force is stronger 8-10 years;  4.Powder coating is not easy to fade in 5-8 years;




                  Card Types                    Color Category
              1. RAL Cards                 213 kinds of colors
              2. PANTONE  Cards               1690 kinds of colors
              3. FRD  Cards                360 kinds of  colors




5. How to choose the product you like?




Our service 


1. We offer professional products and fast delivery.


2. We will help you solve problems when you use our products.


3. Any question can turn to the technology department of our company.




6. Powder Coating Application:






   Our Product specially designed for surface decoration product such as home furniture, electrostatic appliance, industrial equipment, sports equipment, harware, shop tool rack, lamps and lanterns, computer chassics, DVD sheel, etc.




                                             Application Area
1. Household Applications7.  Used for Security Door;
2. Car Coating8.  Radiator & Heat Sink;
3. Used for Valve9.  Corrosion Prevention of Pipes;
4. Track Traffic10. Communications Equipments;
5. Aerospare field11. Hardware & Brightwork;
6. Fitness Equipment12. Zincing & Aluminium;




7.  Powder Coating Productive Process










 8. Powder Coating Testing Equipment and Items:




 Application Parameter:








Pencil hardness

GB/T 6739

≥ H

To agree panel

Impact resistance

GB/T 1732

≥ 50 kg

To agree panel

Flexing endurance

GB/T 6742

≤ 2mm

To agree panel

Adhesive force

GB/T 9286

Grade 0

To agree panel

Bend test

GB/T 6742


To agree panel

Color difference

GB/T 9761-1988

No obvious color difference

To agree panel

Heat text





1. The above test use cold-rolled steel (thickness: 0.8mm) to remove rust and oil. Suggested film thickness:   60—80 um

2. All the indicators of film features will be down lightly depending on reducing of luster.








Company Information

    Workshop Show










Contact Information:


  TEl: 86-523-88686808;  FAX:86-523-88582696;


  Cel: 86-13775795436;Skpye: betty551860;